​Maintenance knowledge of automatic packaging machine - to ensure the good operation of the machine

After the purchase of a new fully automatic repacking machine, it will be lost after a long time of use. If the maintenance of the mechanical equipment is not in place, under the trigger of a certain condition, the mechanical equipment may be damaged. As a result, it costs a lot of money to ask professional maintenance personnel to repair, in fact, these can be avoided. As long as it is necessary to carry out maintenance and repair work on mechanical equipment on a daily basis. Doing a good job in maintenance can greatly improve the safety and stability of machinery and equipment, and make machinery and equipment operate normally. Let's take a look at the maintenance knowledge of mechanical equipment: 1. Before starting the inspection work before the operation of the mechanical equipment, please confirm whether there is any malfunction or displacement of each device. 2. Check whether the screws and other parts are missing or loose, please check once a month. In particular, moving parts such as the fastening bolts and adjusting rods of the cam in the frame are easy to loosen, which may cause damage to some parts of the machine. 3. Filling gears, cams and other transmission parts with lubricating grease, add an appropriate amount of lubricating grease every day to prevent accelerated wear of parts due to lack of lubricating grease. 4. Air filter (where the bag is taken and opened) An air filter is installed on the connecting pipe of the bag taking, opening and controlling the solenoid valve. Please check once a week and clean with an air gun if necessary. Replace if clogged badly. 5. The exhaust filter (at the vacuum air distributor) is equipped with 3 air filter mufflers at the open position of the vacuum chamber cover of the vacuum turntable. Depending on the use environment, all must be replaced every 5 to 7 days to prevent the air filter muffler from being blocked, and the vacuum chamber cover is damaged due to the vacuum in the vacuum chamber not being completely discharged when the cover is opened. Between the maximum and minimum of the oil level mirror. Oil change: 7-15 days for the first time, and every 3-6 months thereafter. 7. Maintenance of vacuum pumps and chillers Strengthening the maintenance of mechanical equipment can not only effectively reduce equipment failure rates, reduce maintenance costs and the number of spare parts reserves, but also greatly reduce downtime and improve the economic benefits of users, which is of great significance to further improve the level of equipment management. .